SOUNDS 1 INSTRUCTIONS 

PLEASE KEEP GEAR DRY AND SAFE, AND DONT BLOW IT UP LOL

DO NOT PLUG DJ EQUIPMENT INTO MIC INPUTS, ONLY LINE INPUTS PLEASE

CONTENTS:

1X CERWIN VEGA LOUDSPEAKER (S1)

1X ASHTON LOUDSPEAKER (S2)

1X SMALL DJ MONITOR (M)

2X SPEAKER STANDS

2X MIC STANDS WITH CLIPS

1X LONG BLACK EXTENSION CHORD

1X SHORT WHITE EXTENTSION CHORD

1X 4 PORT MULTI POWER BOX

3X JUG CHORDS

3X SHORT XLR SPEAKER CABLES

2X LONG XLR MIC CABLES

1X LONG RCA

5X RCA-JACK ADAPTERS

1X XLR TO RCA MONO

1X AUX CHORD TO JACK

(FOR PLUGGING PHONE/COMPUTER STRAIGHT INTO SYSTEM)

SUGGESTED LAYOUT

STEP 0: PLUG IN POWER TO ALL SPEAKERS AND TURN ALL VOLUMES TO ZERO.

 

STEP 1: PLUG LONG RCA CABLE FROM THE DJ INTO MAIN 'CERWIN VEGA' SPEAKER.

PLUG INTO INTO 'INPUT 3' AS SHOWN BELOW USING JACK ADAPTER. 

 

CAREFUL TO KEEP VOLUME LOW WHEN TESTING. ITS A VERY LOUD SPEAKER.

 

PLUG ALL THE WAY IN, THIS PIC IS NOT PUSHED ALL THE WAY IN LOL  

STEP 2: TAKE A SHORT XLR (OR TWO LINKED TOGETHER) AND RUN IT FROM THE 'MIX OUTPUT' INTO THE SMALL DJ MONITOR, FACING THE DJ. 

PLUG IT INTO THE LINE INPUT NOT THE MIC INPUT!! ON DJ MONITOR

STEP 3: TAKE THE 'XLR TO RCA MONO' CABLE PICTURED HERE AND RUN IT FROM 'LINE OUTPUT' OF DJ MONITOR TO 'AUX IN' RCA INPUT OF THE ASHTON LOUDSPEAKER.

STEP 4: CAREFULLY CHECK VOLUMES OF SPEAKERS, NOTE EACH HAS INPUT LEVEL AND MASTER LEVEL. DONT PLUG ANY DJ SOUND INTO ANY MIC CHANNELS EVER!! SET THE VOLUME LEVEL REQUIRED ON THE BACK OF EACH SPEAKER

STEP 5: MICS & STANDS FOR GUITARIST: 

SET UP GUITARIST BEHIND OR BESIDE SPEAKERS, BUT NOT IN FRONT - AS IT WILL FEED BACK. 

ONE STAND IS FOR GUITAR MIC & ONE IS FOR VOCALS

ON CERWIN VEGA SPEAKER: TURN DOWN VOLUME ON CH 1 & 2, AND PLUG IN THE TWO MICS PROVIDED. SET THEM UP ON STANDS FOR GUITARIST. 

MAKE SURE ON SWITCH (ON ACTUAL MICROPHONE) IS ON. 

ONCE GUITARIST IS PLAYING/SOUNDCHECK, BRING UP MIC VOLUME SLOWLY TO A GOOD LEVEL. 

WHEN HE FINISHES JUST TURN OFF MICS AT MIC SWITCH SO IF HE WANTS TO PLAY AGAIN IT IS EASY TO GET A GOOD LEVEL.